Recently, iPhone is so popular all over the world and it is famous for its fashion design and poeful functions.Many of its zmazing application is worked by its touch screen,making calls,sending massages and playing games,to name just a few.So how about if it is broken?Because it is not indestructible,and can crack when the phone is dropped or mishandled.You can send it to the Apple store for an repariment,so why not do it by yourself? In face it is not so difficult as you expected,and follow the detailed instruction.
Before you stat, you have to prepare the following things:
Paper clip Small Phillips screwdriver iPhone pry tool Tweezers Utility knife Rubbing alcohol Cloth iPhone replacement screen
As to the iPhone replacement screen, you can buy it from the online shop as well as other iPhone repair part. They are much cheaper with high quality and a good choice for your cracked iPhone parts.
Here are the detailed steps:
1 Straighten a paper clip and push one end into the small hole at the top of the iPhone. This pops out the SIM card holder. Remove the SIM card. Push the SIM card holder closed.
2 Remove the two screws on the bottom of the iPhone with a small Phillips screwdriver.
3 Look for the seam between the body of the iPhone and the screen. This is found just above the "Home" button. Insert the pry tool in the seam and pry the screen up from the body to expose the connectors. Do not remove it all the way.
4Remove the two connector wires with the pry tool. Flip the white latch up with the pry tool and remove the ribbon attached to the base.
5 Pull the two black strips of tape off the left and right sides of the screen with tweezers.
6 Remove the five screws holding the LCD assembly to the iPhone replacement screen frame of the iPhone. Use the small Phillips screwdriver.
7 Insert the pry tool between the screen frame and the LCD assembly. Pop the screen frame up and pull it away from the LCD assembly.
8 Insert the edge of a utility knife between the screen and screen frame. Pop the cracked screen out of the frame. Remove leftover adhesive on the screen frame with rubbing alcohol and a cloth.
9 Attach the new adhesive strips that come with the replacement screen to the top and bottom of the screen frame. Press the new iPhone screen into place.
10 Reassemble the screen frame to the LCD assembly. Attach the LCD assembly back to the body of the iPhone.
11 Reconnect the connectors, and close the iPhone. Screw the two screws back into the bottom with the small Phillips head screwdriver.12 Insert the end of the paperclip into the hole at the top of the iPhone. Pop out the SIM card holder. Replace the SIM card and close the holder.
But before you do this,make sure that you can make it and you have the related proffesional knowledge, at least you have learned carefully about it.
iAutoblog the premier autoblogger software
No comments:
Post a Comment